VR
WhatsApp

JUTONG

products

JT-75F Aluminium Tilt and Turn Window
JT-75F Aluminium Tilt and Turn Window - 图片 2
JT-75F Aluminium Tilt and Turn Window - 图片 3
JT-75F Aluminium Tilt and Turn Window - 图片 4

JT-75F Aluminium Tilt and Turn Window

1. Brand Name: Jutong
2. Opening Style: Inward opening
3. Aluminium Alloy: 6063-T5 primary aluminium
4. Outer Frame：Depth 75 mm, wall thickness 1.8 mm, face width 30 / 50 mm.
5. Glazing Sash：Depth 85 mm, wall thickness 1.8 mm, face width 59 mm.
6. Glazing：Xinyi primary glass 5G + 18A + 5G, double tempered clear.
7. Handle：Original imported German HOPPE handle.
8. Hardware System：Italian GIESSE hardware as standard; German ROTO concealed hardware optional.
9. Surface Finish ：Powder coating, 15-year colourfastness
10. Process Standard: Glue-injected crimped corner joints — stronger, safer and better looking
11. Locking: Mushroom-head anti-burglary multi-point locking, for a tighter seal and greater security
12. Thermal Break: Isotherm design with a 30 mm wide multi-cavity insulation strip
13. Warranty: 10 Years
14. Application: Residential, Commercial

  • Glue-injected crimped corner joints — corners are crimped and injected with structural adhesive, giving a stronger, safer and better-looking sash.
  • Primary 6063-T5 aluminium — higher hardness and greater toughness than recycled alloy, for lasting dimensional stability.
  • 15-year colourfast finish —  Powder fluorocarbon coating protects against fading, chalking and corrosion.
  • Slim-frame minimal design — a narrow sightline that puts more glass and more daylight into the room.
  • Double tempered insulated glass — high resistance to wind load and impact.
  • EPDM co-extruded equal-pressure gasket, welded as one frame — soft and hard sections are co-extruded and the whole frame is welded, raising water tightness and giving a cleaner line.
  • Straight-through drainage structure — water leaves by the most direct route, so drainage stays smooth even in heavy rain.
  • Isotherm design with a 30 mm multi-cavity thermal break — the insulation line is aligned throughout the section, cutting heat transfer and saving energy.
  • Split glazing beads on frame and sash — beads are separate components, making glazing and installation noticeably faster on site.
Element Standard Supply Optional Upgrades
Aluminium finish Powder fluorocarbon coating, 15-year colourfastness Colour selection from the Jutong colour card; dual-colour interior / exterior combinations on request
Finish texture Smooth powder fluorocarbon coating Metallic, matte or textured finishes from the same coating family
Gasket colour Black EPDM co-extruded gasket, welded frame Light-grey gasket to match pale interior schemes
Spacer finish One-piece bent black warm-edge spacer Light-grey spacer to match pale interiors
Hardware finish Matched to the aluminium colour Contrast hardware finishes on request

 

 

 

  • Standard — Double Tempered Glass (5G + 18A + 5G)
  • Insect screen is offered as an optional accessory

We offer three grille solutions: internal grilles, between-the-glass grilles, and external grilles.

  • Between-the-glass grilles: enhance aesthetic appeal and allow for easy glass cleaning.
  • These grilles are built with spacer bars fitted inside the insulated glass unit, between two panes.
  • Grilles are available in custom colors to match your selected window exterior finish.

Imported ROTO

Original imported German HOPPE handle